EPD-IES-0009194:002

Test 0301 scenarios

123

General information

EPD OwnerEPD International Test AB
Registration numberEPD-IES-0009194:002
PCRPCR 2019:14 Construction products (EN 15804:A2) (1.2.4)
StatusExpired
Publication date2025-01-03
Valid until2025-01-29
EN 15804 compliantYes
Geographical scopeAsia

Product images

Programme information

ProgrammeInternational EPD System
AddressEPD International AB Box 210 60 SE-100 31 Stockholm Sweden
Websitewww.environdec.com
E-mailsupport@environdec.com

Product category rules

CEN standard EN 15804 serves as the Core Product Category Rules (PCR)
Product Category Rules (PCR)PCR 2019:14 Construction products (EN 15804:A2) (1.2.4)
PCR review was conducted byPCR review was conducted by: The Technical Committee of the International EPD System. See www.environdec.com for a list of members. Review chair: Claudia A. Peña, University of Concepción, Chile. The review panel may be contacted via the Secretariat www.environdec.com/support.

Verification

LCA accountabilitySebastian Welling, sebastian.welling@aaa.environdec.com.aaa, EPD International Test AB
Independent third-party verification of the declaration and data, according to ISO 14025:2006, via
Procedure for follow-up of data during EPD validity involves third party verifier
*EPD Process Certification involves an accredited certification body certifying and periodically auditing the EPD process and conducting external and independent verification of EPDs that are regularly published. More information can be found in the General Programme Instructions on www.envrondec.com.

Ownership and limitation on use of EPD

Limitations

EPDs within the same product category but registered in different EPD programmes may not be comparable. For two EPDs to be comparable, they shall be based on the same PCR (including the same version number up to the first two digits) or be based on fully-aligned PCRs or versions of PCRs; cover products with identical functions, technical performances and use (e.g. identical declared/functional units); have equivalent system boundaries and descriptions of data; apply equivalent data quality requirements, methods of data collection, and allocation methods; apply identical cut-off rules and impact assessment methods (including the same version of characterisation factors); have equivalent content declarations; and be valid at the time of comparison.

Ownership

The EPD Owner has the sole ownership, liability, and responsibility for the EPD.

Information about EPD Owner

EPD OwnerEPD International Test AB
Contact person nameSebastian Welling
Contact person e-mailsebastian.welling@aaa.environdec.com.aaa
Organisation addressUkraine 123 123 123

Description of the organisation of the EPD Owner

123

Organisation logo

Product information

Product name123
Product identification123
Product description123
Technical purpose of product123
Manufacturing or service provision description123
Material propertiesCompressive strength (MPa), 123
Production siteAlgeria 123 123
UN CPC code01. Products of agriculture, horticulture and market gardening
Geographical scopeAsia
Hazardous and toxic substancesThe product does not contain any substances from the SVHC candidate list in concentrations exceeding 0.1% of its weight.

Content declaration

Explanation why content declaration is not relevant

123

LCA information

EPD based on declared or functional unitDeclared unit
Declared unit and reference flow123 Length (m), 1
Conversion factor to mass1
Are infrastructure or capital goods included in any upstream, core or downstream processes?
Datasources used for this EPD
LCA SoftwareSimaPro SimaPro 9.4
Version of the EN 15804 reference packageEF Reference Package 3.0
Technology description including background system123
Scrap (recycled material) inputs contribution levelLess than 10% of the GWP-GHG results in modules A1-A3 come from scrap inputs
Electricity data
Electricity used in the manufacturing process in A3
Type of electricity mixResidual electricity mix of the electricity supplier on the market
Energy sourcesHydro1%
Wind1%
Solar1%
Biomass1%
Geothermal1%
Waste1%
Nuclear1%
Natural gas1%
Coal1%
Oil1%
Peat1%
Other1%
GWP-GHG intensity (kg CO2 eq./kWh)1 kg CO2 eq./kWh

System boundary

Description of the system boundaryCradle to grave and module D (A + B + C + D).
Excluded modulesNo, there is no excluded module, or there are no excluded modules

Declared modules

Product stageConstruction process stageUse stageEnd of life stageBeyond product life cycle
Raw material supplyTransportManufacturingTransport to siteConstruction installationUseMaintenanceRepairReplacementRefurbishmentOperational energy useOperational water useDe-construction demolitionTransportWaste processingDisposalReuse-Recovery-Recycling-potential
ModuleA1A2A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
Modules declaredXXXXXXXXXXXXXXXXX
GeographyAfricaGlobalGlobalGlobalGlobalGlobalGlobalGlobalGlobalGlobalGlobalGlobalGlobalGlobalGlobalGlobalGlobal
Share of specific data1%------------
Variation - products1%------------
Variation - sites1%------------

Description of the process flow diagram(s)

123

Scenarios

Name of the default scenarioDefault scenario (name)
Description of the default scenarioDefault scenario description

Module A4: Transport to the building site

Explanatory name of the default scenario in module A4Test1Test1Test1Test1TREEEEEEA4
Brief description of the default scenario in module A4Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1TesA4
Description of the default scenario in module A4123

Module A5: Installation in the building

Explanatory name of the default scenario in module A5Test1Test1Test1Test1TA5
Brief description of the default scenario in module A5Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1TesA5
Description of the default scenario in module A5123

Module B1: Use

Explanatory name of the default scenario in module B1Test1Test1Test1Test1TeB1
Brief description of the default scenario in module B1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1TesB1
Description of the default scenario in module B1123

Module B2: Maintenance

Explanatory name of the default scenario in module B2Test1Test1Test1Test1TeB2
Brief description of the default scenario in module B2Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1TesB2
Description of the default scenario in module B2123

Module B3: Repair

Explanatory name of the default scenario in module B3Test1Test1Test1Test1TeB3
Brief description of the default scenario in module B3Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1TesB3
Description of the default scenario in module B3123

Module B4: Replacement

Explanatory name of the default scenario in module B4Test1Test1Test1Test1TeB4
Brief description of the default scenario in module B4Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1TesB4
Description of the default scenario in module B4123

Module B5: Refurbishment

Explanatory name of the default scenario in module B5Test1Test1Test1Test1TeB5
Brief description of the default scenario in module B5Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1TesB5
Description of the default scenario in module B5123

Module B6: Operational energy use

Explanatory name of the default scenario in module B6Test1Test1Test1Test1TeB6
Brief description of the default scenario in module B6Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1TesB6
Description of the default scenario in module B6123

Module B7: Operational water use

Explanatory name of the default scenario in module B7Test1Test1Test1Test1TeB7
Brief description of the default scenario in module B7Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1TesB7
Description of the default scenario in module B7123

Module C: End-of-life

Explanatory name of the default scenario in module CTest1Test1Test1Test1TesC
Brief description of the default scenario in module CTest1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1TestC
Description of the default scenario in module C123

Reference service life

Description of the default scenario in reference service life123

Module D: Beyond product life cycle

Explanatory name of the default scenario in module DTest1Test1Test1Test1TesD11
Brief description of the default scenario in module DTest1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1Test1TestD
Description of the default scenario in module D123

Additional scenarios

Name of the additional scenarioAdditional scenarion 1
Description of the additional scenarioAdditional scenario description

Module A4: Transport to the building site

Description of the additional scenario in module A4123A

Module A5: Installation in the building

Description of the additional scenario in module A5123A

Module B1: Use

Description of the additional scenario in module B1123A

Module B2: Maintenance

Description of the additional scenario in module B2123A

Module B3: Repair

Description of the additional scenario in module B3123A

Module B4: Replacement

Description of the additional scenario in module B4123A

Module B5: Refurbishment

Description of the additional scenario in module B5123A

Module B6: Operational energy use

Description of the additional scenario in module B6123A

Module B7: Operational water use

Description of the additional scenario in module B7123A

Module C: End-of-life

Description of the additional scenario in module C123A

Reference service life

Description of the additional scenario in reference service life123A

Module D: Beyond product life cycle

Description of the additional scenario in module D123A

Additional scenarios

Name of the additional scenarioAdditional scenario 2
Description of the additional scenarioAdditional scenario description

Module A4: Transport to the building site

Description of the additional scenario in module A4123A2

Module A5: Installation in the building

Description of the additional scenario in module A5123A2

Module B1: Use

Description of the additional scenario in module B1123A2

Module B2: Maintenance

Description of the additional scenario in module B2123A2

Module B3: Repair

Description of the additional scenario in module B3123A2

Module B4: Replacement

Description of the additional scenario in module B4123A2

Module B5: Refurbishment

Description of the additional scenario in module B5123A2

Module B6: Operational energy use

Description of the additional scenario in module B6123A2

Module B7: Operational water use

Description of the additional scenario in module B7123A2

Module C: End-of-life

Description of the additional scenario in module C123A2

Reference service life

Description of the additional scenario in reference service life123A2

Module D: Beyond product life cycle

Description of the additional scenario in module D123A2

Results

Mandatory environmental performance indicators according to EN 15804

Impact categoryIndicatorUnitA1-A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
Climate change - totalGWP-totalkg CO2 eq.6.77E+23.02E+11.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+04.29E+05.19E+02.44E+13.65E-11.70E+1
Climate change - fossilGWP-fossilkg CO2 eq.4.97E+02.29E-21.00E+01.00E+01.00E+01.10E+11.00E+01.00E+01.00E+01.00E+03.35E-23.99E-31.35E-92.09E-4-1.63E-1
Climate change - biogenicGWP-biogenickg CO2 eq.2.17E-11.43E-21.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+04.14E-32.44E-33.57E-22.20E-4-2.57E-3
Climate change - land use and land-use changeGWP-luluckg CO2 eq.6.82E+23.02E+11.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+04.33E+05.20E+02.44E+13.65E-11.68E+1
Ozone depletionODPkg CFC-11 eq.1.42E-56.58E-71.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+08.91E-81.14E-73.87E-71.06E-84.43E-7
AcidificationAPmol H+ eq.2.33E+01.09E-11.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+02.28E-21.75E-22.73E-12.75E-35.49E-2
Eutrophication aquatic freshwaterEP-freshwaterkg P eq.1.35E-12.14E-31.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E-23.69E-41.44E-23.04E-58.08E-3
Eutrophication aquatic marineEP-marinekg N eq.5.75E-13.69E-21.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+07.90E-36.05E-36.37E-21.05E-31.42E-2
Eutrophication terrestrialEP-terrestrialmol N eq.5.65E+03.91E-11.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+08.37E-26.39E-27.11E-11.13E-21.54E-1
Photochemical ozone formationPOCPkg NMVOC eq.2.38E+01.63E-11.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+02.81E-22.72E-22.13E-13.93E-39.96E-2
Depletion of abiotic resources - minerals and metalsADP-minerals&metals1kg Sb eq.2.58E-38.09E-51.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+02.05E-51.40E-51.50E-35.06E-7-2.32E-5
Depletion of abiotic resources - fossil fuelsADP-fossil1MJ, net calorific value8.47E+34.41E+21.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+07.59E+13.30E+29.09E+01.41E+2
Water useWDP1m3 world eq. deprived2.04E+22.10E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+04.50E-13.63E-14.01E+04.01E-19.66E-1
AcronymsGWP-fossil = Global Warming Potential fossil fuels; GWP-biogenic = Global Warming Potential biogenic; GWP-luluc = Global Warming Potential land use and land use change; ODP = Depletion potential of the stratospheric ozone layer; AP = Acidification potential, Accumulated Exceedance; EP-freshwater = Eutrophication potential, fraction of nutrients reaching freshwater end compartment; EP-marine = Eutrophication potential, fraction of nutrients reaching marine end compartment; EP-terrestrial = Eutrophication potential, Accumulated Exceedance; POCP = Formation potential of tropospheric ozone; ADP-minerals&metals = Abiotic depletion potential for non-fossil resources; ADP-fossil = Abiotic depletion for fossil resources potential; WDP = Water (user) deprivation potential, deprivation-weighted water consumption
General disclaimerIt is discouraged to use the results of modules A1-A5 without considering the results of module C.
Disclaimer 1The results of this environmental impact indicator shall be used with care as the uncertainties of these results are high or as there is limited experience with the indicator

Additional mandatory environmental performance indicators

Impact categoryIndicatorUnitA1-A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
Climate change - GWP-GHGGWP-GHG1kg CO2 eq.6.79E+23.02E+11.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+04.30E+05.20E+02.45E+13.65E-11.70E+1
AcronymsGWP-GHG = Global warming potential greenhouse gas.
General disclaimerIt is discouraged to use the results of modules A1-A5 without considering the results of module C.
Disclaimer 1The GWP-GHG indicator is termed GWP-IOBC/GHG in the ILCD+EPD+ data format. The indicator accounts for all greenhouse gases except biogenic carbon dioxide uptake and emissions and biogenic carbon stored in the product. As such, the indicator is identical to GWP-total except that the CF for biogenic CO2 is set to zero.

Resource use indicators according to EN 15804

IndicatorUnitA1-A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
PEREMJ, net calorific value6.67E+26.43E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+05.30E+01.11E+05.12E+17.69E-2-7.88E+0
PERMMJ, net calorific value0.00E+00.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+00.00E+00.00E+00.00E+00.00E+00.00E+0
PERTMJ, net calorific value6.67E+26.43E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+05.30E+01.11E+05.12E+17.69E-2-7.88E+0
PENREMJ, net calorific value8.47E+34.41E+21.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+06.83E+17.59E+13.30E+29.09E+01.41E+2
PENRMMJ, net calorific value0.00E+00.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+00.00E+00.00E+00.00E+00.00E+00.00E+0
PENRTMJ, net calorific value8.47E+34.41E+21.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+06.83E+17.59E+13.30E+29.09E+01.41E+2
SMkg9.57E+20.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+00.00E+00.00E+00.00E+00.00E+00.00E+0
RSFMJ, net calorific value9.12E+10.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+00.00E+00.00E+00.00E+00.00E+00.00E+0
NRSFMJ, net calorific value0.00E+00.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+00.00E+00.00E+00.00E+00.00E+00.00E+0
FWm35.54E+06.89E-21.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+02.40E-21.19E-21.64E-19.65E-33.92E-4
AcronymsPERE = Use of renewable primary energy excluding renewable primary energy resources used as raw materials; PERM = Use of renewable primary energy resources used as raw materials; PERT = Total use of renewable primary energy resources; PENRE = Use of non-renewable primary energy excluding non-renewable primary energy resources used as raw materials; PENRM = Use of non-renewable primary energy resources used as raw materials; PENRT = Total use of non-renewable primary energy re-sources; SM = Use of secondary material; RSF = Use of renewable secondary fuels; NRSF = Use of non-renewable secondary fuels; FW = Use of net fresh water.
General disclaimerIt is discouraged to use the results of modules A1-A5 without considering the results of module C.

Waste indicators according to EN 15804

IndicatorUnitA1-A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
HWDkg3.25E+02.73E-31.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+03.34E-44.72E-41.83E-34.81E-52.37E-3
NHWDkg4.56E+23.84E+11.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+02.81E+06.66E+09.50E+26.00E+1-2.43E+0
RWDkg1.03E-21.34E-41.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.65E-42.32E-56.69E-41.34E-6-3.70E-4
AcronymsHWD = Hazardous waste disposed; NHWD = Non-hazardous waste disposed; RWD = Radioactive waste disposed.
General disclaimerIt is discouraged to use the results of modules A1-A5 without considering the results of module C.

Output flow indicators according to EN 15804

IndicatorUnitA1-A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
CRUkg0.00E+00.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+00.00E+00.00E+00.00E+00.00E+00.00E+0
MFRkg1.73E+20.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+00.00E+00.00E+09.40E+20.00E+00.00E+0
MERkg0.00E+00.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+00.00E+00.00E+00.00E+00.00E+00.00E+0
EEEMJ, net calorific value0.00E+00.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+00.00E+00.00E+00.00E+00.00E+00.00E+0
EETMJ, net calorific value0.00E+00.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+01.00E+00.00E+00.00E+00.00E+00.00E+00.00E+0
AcronymsCRU = Components for re-use; MFR = Materials for recycling; MER = Materials for energy recovery; EEE = Exported electrical energy; EET = Exported thermal energy.
General disclaimerIt is discouraged to use the results of modules A1-A5 without considering the results of module C.

Additional information

Version history

Version 2

References

123