EPD-IES-0009414:002

Test Yana 0502

General information

EPD Owner!!!demo111
Registration numberEPD-IES-0009414:002
PCRPCR 2019:14 Construction products (EN 15804:A2) (1.2.4)
StatusExpired
Publication date2025-02-05
Valid until2025-02-19
EN 15804 compliantYes
Geographical scopeGlobal

Programme information

ProgrammeInternational EPD System
AddressEPD International AB Box 210 60 SE-100 31 Stockholm Sweden
Websitewww.environdec.com
E-mailsupport@environdec.com

Product category rules

CEN standard EN 15804 serves as the Core Product Category Rules (PCR)
Product Category Rules (PCR)PCR 2019:14 Construction products (EN 15804:A2) (1.2.4)
PCR review was conducted byPCR review was conducted by: The Technical Committee of the International EPD System. See www.environdec.com for a list of members. Review chair: Claudia A. Peña, University of Concepción, Chile. The review panel may be contacted via the Secretariat www.environdec.com/support.
Complementary Product Category Rules (c-PCR)PCR 2019:14-c-PCR-001 c-PCR-001 Cement and building lime (EN 16908) (2022-05-18) Version: 1.2.4
c-PCR review was conducted byThe Technical Committee of the International EPD System

Verification

LCA accountabilityDemo EPD Owner, demo@aaa.environdec.com.aaa, !!!demo111
Independent third-party verification of the declaration and data, according to ISO 14025:2006, via
Third-party verifierBrad McAllister (WAP Sustainability Consulting)
Approved byInternational EPD System
Procedure for follow-up of data during EPD validity involves third party verifier
*EPD Process Certification involves an accredited certification body certifying and periodically auditing the EPD process and conducting external and independent verification of EPDs that are regularly published. More information can be found in the General Programme Instructions on www.envrondec.com.

Ownership and limitation on use of EPD

Limitations

EPDs within the same product category but registered in different EPD programmes may not be comparable. For two EPDs to be comparable, they shall be based on the same PCR (including the same version number up to the first two digits) or be based on fully-aligned PCRs or versions of PCRs; cover products with identical functions, technical performances and use (e.g. identical declared/functional units); have equivalent system boundaries and descriptions of data; apply equivalent data quality requirements, methods of data collection, and allocation methods; apply identical cut-off rules and impact assessment methods (including the same version of characterisation factors); have equivalent content declarations; and be valid at the time of comparison.

Ownership

The EPD Owner has the sole ownership, liability, and responsibility for the EPD.

Information about EPD Owner

EPD Owner!!!demo111
Contact person nameDenys Hrynenko
Contact person e-maildenys.hrynenko@sigma.software
Organisation addressNew Zealand 123 123 123

Description of the organisation of the EPD Owner

Test Test Test Test Test Test

Organisation logo

Product information

Test Test Test

Product nameTest Test Test
Product identificationTest Test Test
Product descriptionTest Test Test
Product information from external sourcesTest Test Test
Technical purpose of productTest Test Test Test Test Test
Manufacturing or service provision descriptionTest Test Test Test Test Test
Material propertiesCompressive strength (MPa), 1 Bulk density (kg/m3), 2 Gross density (kg/m3), 3
Production siteAlbania 123 123
UN CPC code01. Products of agriculture, horticulture and market gardening
GTIN123
Geographical scopeGlobal
Geographical scope descriptionTest Test Test Test Test Test Test Test Test
Actual or technical lifespan1 years

Product images

Test Test Test 2

Product nameTest Test Test 2
Product identificationTest Test Test
Product descriptionTest Test Test
Product information from external sourcesTest Test Test
Technical purpose of productTest Test Test Test Test Test
Manufacturing or service provision descriptionTest Test Test Test Test Test
Material propertiesCompressive strength (MPa), 1 Bulk density (kg/m3), 2 Gross density (kg/m3), 3
Production siteAlbania 123 123
UN CPC code01. Products of agriculture, horticulture and market gardening
GTIN123
Geographical scopeGlobal
Geographical scope descriptionTest Test Test Test Test Test Test Test Test
Actual or technical lifespan1 years

Product images

Content declaration

Product content
Content nameWeight, kgPost-consumer recycled material, weight-% of productBiogenic material, weight-% of productBiogenic material1, kg C/declared unit or product
11111
22222
Total3333
Note11 kg biogenic carbon is equivalent to 44/12 kg of CO2
Packaging materials
Material nameWeight, kgWeight-% (versus the product)Biogenic material1, kg C/declared unit or product
1111
2222
Total333
Note11 kg biogenic carbon is equivalent to 44/12 kg of CO2
Hazardous and toxic Substances
Hazardous/Toxic substances from the candidate listEC No.CAS No.Weight per functional or declared unit %
Bis(β,?-dimethylbenzyl) peroxide201-279-380-43-31

LCA information

EPD based on declared or functional unitFunctional unit
Functional unit descriptionTest Test Test Test Test Test Test Test Test
Reference flowTest Test Test Test Test Test 2 Area (m2), 1
Conversion factor to mass12
Are infrastructure or capital goods included in any upstream, core or downstream processes?
Detailed description of infrastructure and capital goods

Test Test Test Test Test Test

Datasources used for this EPD
LCA SoftwareSimaPro SimaPro 9.5
Additional information about the underlying LCA-based informationTest Test Test Test Test Test
Version of the EN 15804 reference packageEF Reference Package 3.0
Characterisation methodsTest Test Test Test Test Test
Technology description including background systemTest Test Test Test Test Test
Scrap (recycled material) inputs contribution levelLess than 10% of the GWP-GHG results in modules A1-A3 come from scrap inputs
Electricity data
Electricity used in the manufacturing process in A3
Type of electricity mixSpecific electricity mix as generated, or purchased from an electricity supplier, demonstrated by a contractual instrument
Energy sourcesHydro1%
Wind2%
Solar3%
Biomass1%
Geothermal1%
Waste1%
Nuclear1%
Natural gas1%
Coal1%
Oil1%
Peat1%
Other1%
GWP-GHG intensity (kg CO2 eq./kWh)1 kg CO2 eq./kWh
CO2 uptake associated with carbonation and its assumptions
Production stage (module A)Excluded
Use stage (module B)Excluded
End-of-Life stage (module C)Excluded
Beyond product life cycle (Module D)Excluded

System boundary

Description of the system boundaryCradle to grave and module D (A + B + C + D).
Excluded modulesNo, there is no excluded module, or there are no excluded modules

Declared modules

Product stageConstruction process stageUse stageEnd of life stageBeyond product life cycle
Raw material supplyTransportManufacturingTransport to siteConstruction installationUseMaintenanceRepairReplacementRefurbishmentOperational energy useOperational water useDe-construction demolitionTransportWaste processingDisposalReuse-Recovery-Recycling-potential
ModuleA1A2A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
Modules declaredXXXXNDNDNDNDNDNDNDNDXXXXX
GeographyGlobalGlobalGlobalGlobalN/AN/AN/AN/AN/AN/AN/AN/AGlobalGlobalGlobalGlobalGlobal
Share of specific data1%--------------
Variation - products2%--------------
Variation - sites3%--------------

Description of the process flow diagram(s)

Test Test Test Test Test Test Test Test Test Test Test Test Test Test Test

Scenarios

Name of the default scenarioScenario 1
Description of the default scenarioDescription of the default scenario

Module A4: Transport to the building site

Explanatory name of the default scenario in module A4Name Module A4
Brief description of the default scenario in module A4Description Module A4
Description of the default scenario in module A4123
Module A4 informationValueUnit
Distance
23213
N/A
Capacity utilization (including empty returns)
123123
N/A
Bulk density of transported products
1231231
kg/m3
Volume capacity utilization factor
(factor: =1 or <1 or ≥1 for compressed or
nested packaged products)
123321
kg/m3
12321123321
km

Module C: End-of-life

Explanatory name of the default scenario in module CName Module C
Brief description of the default scenario in module CDescription Module C
Description of the default scenario in module C123
Module C informationValueUnit
123213
kg/m3
123233
N/A

Reference service life

Description of the default scenario in reference service life123

Module D: Beyond product life cycle

Explanatory name of the default scenario in module DName Module D
Brief description of the default scenario in module DDescription Module D
Description of the default scenario in module D123
Module D informationValueUnit
123123
kg/m3

Results

Mandatory environmental performance indicators according to EN 15804

Impact categoryIndicatorUnitA1-A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
Climate change - totalGWP-totalkg CO2 eq.6.77E+23.02E+1NDNDNDNDNDNDNDND4.29E+05.19E+02.44E+13.65E-11.70E+1
Climate change - fossilGWP-fossilkg CO2 eq.4.97E+02.29E-2NDNDNDNDNDNDNDND3.35E-23.99E-31.35E-92.09E-4-1.63E-1
Climate change - biogenicGWP-biogenickg CO2 eq.2.17E-11.43E-2NDNDNDNDNDNDNDND4.14E-32.44E-33.57E-22.20E-4-2.57E-3
Climate change - land use and land-use changeGWP-luluckg CO2 eq.6.82E+23.02E+1NDNDNDNDNDNDNDND4.33E+05.20E+02.44E+13.65E-11.68E+1
Ozone depletionODPkg CFC-11 eq.1.42E-56.58E-7NDNDNDNDNDNDNDND8.91E-81.14E-73.87E-71.06E-84.43E-7
AcidificationAPmol H+ eq.2.33E+01.09E-1NDNDNDNDNDNDNDND2.28E-21.75E-22.73E-12.75E-35.49E-2
Eutrophication aquatic freshwaterEP-freshwaterkg P eq.1.35E-12.14E-3NDNDNDNDNDNDNDND1.15E-33.69E-41.44E-23.04E-58.08E-3
Eutrophication aquatic marineEP-marinekg N eq.5.75E-13.69E-2NDNDNDNDNDNDNDND7.92E-36.05E-36.37E-21.05E-31.42E-2
Eutrophication terrestrialEP-terrestrialmol N eq.5.65E+03.91E-1NDNDNDNDNDNDNDND8.37E-26.39E-27.11E-11.13E-21.54E-1
Photochemical ozone formationPOCPkg NMVOC eq.2.38E+01.63E-1NDNDNDNDNDNDNDND2.81E-22.72E-22.13E-13.93E-39.96E-2
Depletion of abiotic resources - minerals and metalsADP-minerals&metals1, 2kg Sb eq.2.58E-38.09E-5NDNDNDNDNDNDNDND2.05E-51.40E-51.50E-35.06E-7-2.32E-5
Depletion of abiotic resources - fossil fuelsADP-fossil1MJ, net calorific value8.47E+34.41E+2NDNDNDNDNDNDNDND6.83E+17.59E+13.30E+29.09E+01.41E+2
Water useWDP1m3 world eq. deprived2.04E+22.10E+0NDNDNDNDNDNDNDND4.54E-13.63E-14.01E+04.01E-19.66E-1
AcronymsGWP-fossil = Global Warming Potential fossil fuels; GWP-biogenic = Global Warming Potential biogenic; GWP-luluc = Global Warming Potential land use and land use change; ODP = Depletion potential of the stratospheric ozone layer; AP = Acidification potential, Accumulated Exceedance; EP-freshwater = Eutrophication potential, fraction of nutrients reaching freshwater end compartment; EP-marine = Eutrophication potential, fraction of nutrients reaching marine end compartment; EP-terrestrial = Eutrophication potential, Accumulated Exceedance; POCP = Formation potential of tropospheric ozone; ADP-minerals&metals = Abiotic depletion potential for non-fossil resources; ADP-fossil = Abiotic depletion for fossil resources potential; WDP = Water (user) deprivation potential, deprivation-weighted water consumption
General disclaimerIt is discouraged to use the results of modules A1-A3 without considering the results of module C.
Disclaimer 1The results of this environmental impact indicator shall be used with care as the uncertainties of these results are high or as there is limited experience with the indicator
Disclaimer 2The results of the impact categories abiotic depletion of minerals and metals may be highly uncertain in LCAs that include capital goods/infrastructure in generic datasets, in case infrastructure/capital goods contribute greatly to the total results. This is because the LCI data of infrastructure/capital goods used to quantify these indicators in currently available generic datasets sometimes lack temporal, technological and geographical representativeness. Caution should be exercised when using the results of these indicators for decision-making purposes.

Additional mandatory environmental performance indicators

Impact categoryIndicatorUnitA1-A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
Climate change - GWP-GHGGWP-GHG1kg CO2 eq.6.79E+23.02E+1NDNDNDNDNDNDNDND4.30E+05.20E+02.45E+13.65E-11.70E+1
AcronymsGWP-GHG = Global warming potential greenhouse gas.
General disclaimerIt is discouraged to use the results of modules A1-A3 without considering the results of module C.
Disclaimer 1The GWP-GHG indicator is termed GWP-IOBC/GHG in the ILCD+EPD+ data format. The indicator accounts for all greenhouse gases except biogenic carbon dioxide uptake and emissions and biogenic carbon stored in the product. As such, the indicator is identical to GWP-total except that the CF for biogenic CO2 is set to zero.

Resource use indicators according to EN 15804

IndicatorUnitA1-A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
PEREMJ, net calorific value6.67E+26.43E+0NDNDNDNDNDNDNDND5.30E+01.11E+05.12E+17.69E-2-7.88E+0
PERMMJ, net calorific value0.00E+00.00E+0NDNDNDNDNDNDNDND0.00E+00.00E+00.00E+00.00E+00.00E+0
PERTMJ, net calorific value6.67E+26.43E+0NDNDNDNDNDNDNDND5.30E+01.11E+05.12E+17.69E-2-7.88E+0
PENREMJ, net calorific value8.47E+34.41E+2NDNDNDNDNDNDNDND6.83E+17.59E+13.30E+29.09E+01.41E+2
PENRMMJ, net calorific value0.00E+00.00E+0NDNDNDNDNDNDNDND0.00E+00.00E+00.00E+00.00E+00.00E+0
PENRTMJ, net calorific value8.47E+34.41E+2NDNDNDNDNDNDNDND6.83E+17.59E+13.30E+29.09E+01.41E+2
SMkg9.57E+20.00E+0NDNDNDNDNDNDNDND0.00E+00.00E+00.00E+00.00E+00.00E+0
RSFMJ, net calorific value9.12E+10.00E+0NDNDNDNDNDNDNDND0.00E+00.00E+00.00E+00.00E+00.00E+0
NRSFMJ, net calorific value0.00E+00.00E+0NDNDNDNDNDNDNDND0.00E+00.00E+00.00E+00.00E+00.00E+0
FWm35.54E+06.89E-2NDNDNDNDNDNDNDND2.40E-21.19E-21.64E-19.65E-33.92E-4
AcronymsPERE = Use of renewable primary energy excluding renewable primary energy resources used as raw materials; PERM = Use of renewable primary energy resources used as raw materials; PERT = Total use of renewable primary energy resources; PENRE = Use of non-renewable primary energy excluding non-renewable primary energy resources used as raw materials; PENRM = Use of non-renewable primary energy resources used as raw materials; PENRT = Total use of non-renewable primary energy re-sources; SM = Use of secondary material; RSF = Use of renewable secondary fuels; NRSF = Use of non-renewable secondary fuels; FW = Use of net fresh water.
General disclaimerIt is discouraged to use the results of modules A1-A3 without considering the results of module C.

Waste indicators according to EN 15804

IndicatorUnitA1-A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
HWDkg3.25E+02.73E-3NDNDNDNDNDNDNDND3.34E-44.72E-41.83E-34.81E-52.37E-3
NHWDkg4.56E+23.84E+1NDNDNDNDNDNDNDND2.81E+06.66E+09.50E+26.00E+1-2.43E+0
RWDkg1.03E-21.34E-4NDNDNDNDNDNDNDND1.65E-42.32E-56.69E-41.34E-6-3.70E-4
AcronymsHWD = Hazardous waste disposed; NHWD = Non-hazardous waste disposed; RWD = Radioactive waste disposed.
General disclaimerIt is discouraged to use the results of modules A1-A3 without considering the results of module C.

Output flow indicators according to EN 15804

IndicatorUnitA1-A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
CRUkg0.00E+00.00E+0NDNDNDNDNDNDNDND0.00E+00.00E+00.00E+00.00E+00.00E+0
MFRkg1.73E+20.00E+0NDNDNDNDNDNDNDND0.00E+00.00E+09.40E+20.00E+00.00E+0
MERkg0.00E+00.00E+0NDNDNDNDNDNDNDND0.00E+00.00E+00.00E+00.00E+00.00E+0
EEEMJ, net calorific value0.00E+00.00E+0NDNDNDNDNDNDNDND0.00E+00.00E+00.00E+00.00E+00.00E+0
EETMJ, net calorific value0.00E+00.00E+0NDNDNDNDNDNDNDND0.00E+00.00E+00.00E+00.00E+00.00E+0
AcronymsCRU = Components for re-use; MFR = Materials for recycling; MER = Materials for energy recovery; EEE = Exported electrical energy; EET = Exported thermal energy.
General disclaimerIt is discouraged to use the results of modules A1-A3 without considering the results of module C.

Additional information

Version history

Version 2

References

Test Test Test Test Test Test Test Test Test