EPD-IES-0009799:004

Test Yana 1403 P

qwe

General information

EPD Owner	EPD International Test AB
Registration number	EPD-IES-0009799:004
PCR	PCR 2019:14 Construction products (EN 15804:A2) (1.2.4)
Status	Expired
Publication date	2025-05-16
Valid until	2025-05-15
EN 15804 compliant	Yes
Geographical scope	Asia

Product images

Programme information

Programme	International EPD System
Address	EPD International AB Box 210 60 SE-100 31 Stockholm Sweden
Website	www.environdec.com
E-mail	support@environdec.com

Product category rules

CEN standard EN 15804 and ISO standard ISO 21930 serve as the core Product Category Rules (PCR)
Product Category Rules (PCR)	PCR 2019:14 Construction products (EN 15804:A2) (1.2.4)
PCR review was conducted by	PCR review was conducted by: The Technical Committee of the International EPD System. See www.environdec.com for a list of members. Review chair: Claudia A. Peña, University of Concepción, Chile. The review panel may be contacted via the Secretariat www.environdec.com/support.
Complementary Product Category Rules (c-PCR)	PCR 2019:14-c-PCR-014 c-PCR-014 Acoustical ceiling and wall solutions (2022-01-28) Version: 1.2.4
c-PCR review was conducted by	The Technical Committee of the International EPD System

Verification

LCA accountability	fiona.bian@aaa.bureauveritas.com.aaa, fiona.bian@aaa.bureauveritas.com.aaa, EPD International Test AB
Independent third-party verification of the declaration and data, according to ISO 14025:2006, via	EPD verification through an individual EPD verification EPD verification through EPD Process Certification* EPD verification through a pre-verified LCA/EPD tool
Procedure for follow-up of data during EPD validity involves third party verifier	Yes No
*EPD Process Certification involves an accredited certification body certifying and periodically auditing the EPD process and conducting external and independent verification of EPDs that are regularly published. More information can be found in the General Programme Instructions on www.envrondec.com.

Ownership and limitation on use of EPD

Limitations

EPDs within the same product category but registered in different EPD programmes may not be comparable. For two EPDs to be comparable, they shall be based on the same PCR (including the same version number up to the first two digits) or be based on fully-aligned PCRs or versions of PCRs; cover products with identical functions, technical performances and use (e.g. identical declared/functional units); have equivalent system boundaries and descriptions of data; apply equivalent data quality requirements, methods of data collection, and allocation methods; apply identical cut-off rules and impact assessment methods (including the same version of characterisation factors); have equivalent content declarations; and be valid at the time of comparison.

Additional limitations according to c-PCR: Comparability between EPDs is only achievable if the following performance characteristics are equivalent: declared unit, containment level, level of working width, assumed service life, geographic region and fulfilment of the same requirements of the applicable standard (EN 13964:2014).

Ownership

The EPD Owner has the sole ownership, liability, and responsibility for the EPD.

Information about EPD Owner

EPD Owner	EPD International Test AB
Contact person name	qwe
Contact person e-mail	weqqwe
Organisation address	Zimbabwe 123 1234 132

Description of the organisation of the EPD Owner

qwe

Organisation logo

Product information

Product name	qwe
Product identification	qwe
Product description	qwe
Technical purpose of product	qwe
Manufacturing or service provision description	qwe
Material properties	Compressive strength (MPa), 1
Production site	asdsd Algeria qwewqe 123
UN CPC code	No applicable UN CPC code
Geographical scope	Asia
Hazardous and toxic substances	The product does not contain any substances from the SVHC candidate list in concentrations exceeding 0.1% of its weight.

Content declaration

Product content
Content name	Weight, kg	Post-consumer recycled material, weight-% of product	Biogenic material, weight-% of product	Biogenic material¹, kg C/declared unit or product	Biogenic material kg CO₂, eq./declared unit or product
1	2	3	4	5	18.33
Total	2	3	4	5	18.33
Note¹	1 kg biogenic carbon is equivalent to 44/12 kg of CO₂

Panel content
Material name	Weight, kg	Weight-% (versus the product)	Biogenic material¹, kg C/declared unit or product	Biogenic material kg CO₂, eq./declared unit or product
1	2	3	4	14.67
Total	2	3	4	14.67
Note¹	1 kg biogenic carbon is equivalent to 44/12 kg of CO₂

Packaging materials
Material name	Weight, kg	Weight-% (versus the product)	Biogenic material¹, kg C/declared unit or product	Biogenic material kg CO₂, eq./declared unit or product
1	2	3	4	14.67
Total	2	3	4	14.67
Note¹	1 kg biogenic carbon is equivalent to 44/12 kg of CO₂

Best-case product

Product name	123

Product content
Content name	Weight, kg	Post-consumer recycled material, weight-% of product	Biogenic material, weight-% of product	Biogenic material¹, kg C/declared unit or product	Biogenic material kg CO₂, eq./declared unit or product
1	2	3	4	5	18.33
Total	2	3	4	5	18.33
Note¹	1 kg biogenic carbon is equivalent to 44/12 kg of CO₂

Panel content
Material name	Weight, kg	Weight-% (versus the product)	Biogenic material¹, kg C/declared unit or product	Biogenic material kg CO₂, eq./declared unit or product
1	2	2	2	7.33
Total	2	2	2	7.33
Note¹	1 kg biogenic carbon is equivalent to 44/12 kg of CO₂

Packaging materials
Material name	Weight, kg	Weight-% (versus the product)	Biogenic material¹, kg C/declared unit or product	Biogenic material kg CO₂, eq./declared unit or product
1	2	3	4	14.67
Total	2	3	4	14.67
Note¹	1 kg biogenic carbon is equivalent to 44/12 kg of CO₂

Worst-case product

Product name	1234

Product content
Content name	Weight, kg	Post-consumer recycled material, weight-% of product	Biogenic material, weight-% of product	Biogenic material¹, kg C/declared unit or product	Biogenic material kg CO₂, eq./declared unit or product
1	2	3	3	3	11
Total	2	3	3	3	11
Note¹	1 kg biogenic carbon is equivalent to 44/12 kg of CO₂

Panel content
Material name	Weight, kg	Weight-% (versus the product)	Biogenic material¹, kg C/declared unit or product	Biogenic material kg CO₂, eq./declared unit or product
1	2	2	2	7.33
Total	2	2	2	7.33
Note¹	1 kg biogenic carbon is equivalent to 44/12 kg of CO₂

Packaging materials
Material name	Weight, kg	Weight-% (versus the product)	Biogenic material¹, kg C/declared unit or product	Biogenic material kg CO₂, eq./declared unit or product
1	2	3	1	3.67
Total	2	3	1	3.67
Note¹	1 kg biogenic carbon is equivalent to 44/12 kg of CO₂

LCA information

EPD based on declared or functional unit	Declared unit
Declared unit and reference flow	adssad Area (m²), 123
Conversion factor to mass	123
Are infrastructure or capital goods included in any upstream, core or downstream processes?	Yes No
Datasources used for this EPD
LCA Software	SimaPro SimaPro 9.4
Version of the EN 15804 reference package	EF Reference Package 3.1
Technology description including background system	asd
Scrap (recycled material) inputs contribution level	Less than 10% of the GWP-GHG results in modules A1-A3 come from scrap inputs

Electricity data
Electricity used in the manufacturing process in A3
Type of electricity mix	Residual electricity mix of the electricity supplier on the market
Energy sources	Hydro	1%
	Wind	1%
	Solar	0%
	Biomass	0%
	Geothermal	0%
	Waste	0%
	Nuclear	0%
	Natural gas	0%
	Coal	0%
	Oil	0%
	Peat	0%
	Other	0%
GWP-GHG intensity (kg CO₂ eq./kWh)	1 kg CO₂ eq./kWh

System boundary

Description of the system boundary	Cradle to grave and module D (A + B + C + D).
Excluded modules	No, there is no excluded module, or there are no excluded modules

Declared modules

	Product stage			Construction process stage		Use stage							End of life stage				Beyond product life cycle
	Raw material supply	Transport	Manufacturing	Transport to site	Construction installation	Use	Maintenance	Repair	Replacement	Refurbishment	Operational energy use	Operational water use	De-construction demolition	Transport	Waste processing	Disposal	Reuse-Recovery-Recycling-potential
Module	A1	A2	A3	A4	A5	B1	B2	B3	B4	B5	B6	B7	C1	C2	C3	C4	D
Modules declared	X	X	X	X	ND	ND	ND	ND	ND	ND	ND	ND	X	X	X	X	X
Geography	Global	Global	Global	Global	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	Global	Global	Global	Global	Global
Share of specific data	1%			-	-	-	-	-	-	-	-	-	-	-	-	-	-
Variation - products	1%			-	-	-	-	-	-	-	-	-	-	-	-	-	-
Variation - sites	1%			-	-	-	-	-	-	-	-	-	-	-	-	-	-

Scenarios

Name of the default scenario	qwe
Description of the default scenario	qwe

Module A4: Transport to the building site

Explanatory name of the default scenario in module A4	qwe
Brief description of the default scenario in module A4	qwe
Description of the default scenario in module A4	qwe

Module C: End-of-life

Explanatory name of the default scenario in module C	qwe
Brief description of the default scenario in module C	qwe123
Description of the default scenario in module C	qwe

Reference service life

Description of the default scenario in reference service life	123

Reference service life information	Value	Unit
Reference service life		km

Module D: Beyond product life cycle

Explanatory name of the default scenario in module D	qwe
Brief description of the default scenario in module D	qwe
Description of the default scenario in module D	qwe

Results

Mandatory environmental performance indicators according to EN 15804

Impact category	Indicator	Unit	A1-A3	A4	A5	B1	B2	B3	B4	B5	B6	B7	C1	C2	C3	C4	D	Variation²
Climate change - total	GWP-total	kg CO₂ eq.	6.77E+2	3.02E+1	ND	ND	ND	ND	ND	ND	ND	ND	4.29E+0	5.19E+0	2.44E+1	3.65E-1	1.70E+1	1.00%
Climate change - fossil	GWP-fossil	kg CO₂ eq.	4.97E+0	2.29E-2	ND	ND	ND	ND	ND	ND	ND	ND	3.35E-2	3.99E-3	1.35E-9	2.09E-4	-1.63E-1	2.00%
Climate change - biogenic	GWP-biogenic	kg CO₂ eq.	2.17E-1	1.43E-2	ND	ND	ND	ND	ND	ND	ND	ND	4.14E-3	2.44E-3	3.57E-2	2.20E-4	-2.57E-3
Climate change - land use and land-use change	GWP-luluc	kg CO₂ eq.	6.82E+2	3.02E+1	ND	ND	ND	ND	ND	ND	ND	ND	4.33E+0	5.20E+0	2.44E+1	3.65E-1	1.68E+1
Ozone depletion	ODP	kg CFC-11 eq.	1.42E-5	6.58E-7	ND	ND	ND	ND	ND	ND	ND	ND	8.91E-8	1.14E-7	3.87E-7	1.06E-8	4.43E-7
Acidification	AP	mol H⁺ eq.	2.33E+0	1.09E-1	ND	ND	ND	ND	ND	ND	ND	ND	2.28E-2	1.75E-2	2.73E-1	2.75E-3	5.49E-2
Eutrophication aquatic freshwater	EP-freshwater	kg P eq.	1.35E-1	2.14E-3	ND	ND	ND	ND	ND	ND	ND	ND	1.15E-3	3.69E-4	1.44E-2	3.04E-5	8.08E-3
Eutrophication aquatic marine	EP-marine	kg N eq.	5.75E-1	3.69E-2	ND	ND	ND	ND	ND	ND	ND	ND	7.92E-3	6.05E-3	6.37E-2	1.05E-3	1.42E-2
Eutrophication terrestrial	EP-terrestrial	mol N eq.	5.65E+0	3.91E-1	ND	ND	ND	ND	ND	ND	ND	ND	8.37E-2	6.39E-2	7.11E-1	1.13E-2	1.54E-1
Photochemical ozone formation	POCP	kg NMVOC eq.	2.38E+0	1.63E-1	ND	ND	ND	ND	ND	ND	ND	ND	2.81E-2	2.72E-2	2.13E-1	3.93E-3	9.96E-2
Depletion of abiotic resources - minerals and metals	ADP-minerals&metals¹	kg Sb eq.	2.58E-3	8.09E-5	ND	ND	ND	ND	ND	ND	ND	ND	2.05E-5	1.40E-5	1.50E-3	5.06E-7	-2.32E-5
Depletion of abiotic resources - fossil fuels	ADP-fossil¹	MJ, net calorific value	8.47E+3	4.41E+2	ND	ND	ND	ND	ND	ND	ND	ND	6.83E+1	7.59E+1	3.30E+2	9.09E+0	1.41E+2
Water use	WDP¹	m³ world eq. deprived	2.04E+2	2.10E+0	ND	ND	ND	ND	ND	ND	ND	ND	4.54E-1	3.63E-1	4.01E+0	4.01E-1	9.66E-1
Acronyms	GWP-fossil = Global Warming Potential fossil fuels; GWP-biogenic = Global Warming Potential biogenic; GWP-luluc = Global Warming Potential land use and land use change; ODP = Depletion potential of the stratospheric ozone layer; AP = Acidification potential, Accumulated Exceedance; EP-freshwater = Eutrophication potential, fraction of nutrients reaching freshwater end compartment; EP-marine = Eutrophication potential, fraction of nutrients reaching marine end compartment; EP-terrestrial = Eutrophication potential, Accumulated Exceedance; POCP = Formation potential of tropospheric ozone; ADP-minerals&metals = Abiotic depletion potential for non-fossil resources; ADP-fossil = Abiotic depletion for fossil resources potential; WDP = Water (user) deprivation potential, deprivation-weighted water consumption
General disclaimer	It is discouraged to use the results of modules A1-A3 without considering the results of module C.
Disclaimer 1	The results of this environmental impact indicator shall be used with care as the uncertainties of these results are high or as there is limited experience with the indicator
Disclaimer 2	The maximum variation in results between the included products.

Additional mandatory environmental performance indicators

Impact category	Indicator	Unit	A1-A3	A4	A5	B1	B2	B3	B4	B5	B6	B7	C1	C2	C3	C4	D	Variation²
Climate change - GWP-GHG	GWP-GHG¹	kg CO₂ eq.	6.79E+2	3.02E+1	ND	ND	ND	ND	ND	ND	ND	ND	4.30E+0	5.20E+0	2.45E+1	3.65E-1	1.70E+1	1.00%
Acronyms	GWP-GHG = Global warming potential greenhouse gas.
General disclaimer	It is discouraged to use the results of modules A1-A3 without considering the results of module C.
Disclaimer 1	The GWP-GHG indicator is termed GWP-IOBC/GHG in the ILCD+EPD+ data format. The indicator accounts for all greenhouse gases except biogenic carbon dioxide uptake and emissions and biogenic carbon stored in the product. As such, the indicator is identical to GWP-total except that the CF for biogenic CO₂ is set to zero.
Disclaimer 2	The maximum variation in results between the included products.

Additional voluntary environmental performance indicators according to EN 15804

Impact category	Indicator	Unit	A1-A3	A4	A5	B1	B2	B3	B4	B5	B6	B7	C1	C2	C3	C4	D	Variation³
Particulate matter emissions	PM	Disease incidence	1.00E+0	1.00E+0	ND	ND	ND	ND	ND	ND	ND	ND	1.00E+0	1.00E+0	1.00E+0	1.00E+0	1.00E+0	1.00%
Ionizing radiation - human health	IRP¹	kBq U235 eq.	1.10E+1	1.10E+1	ND	ND	ND	ND	ND	ND	ND	ND	1.10E+1	1.00E+0	1.00E+0	1.00E+0	1.00E+0	2.00%
Eco-toxicity - freshwater	ETP-fw²	CTUe	1.00E+0	1.00E+0	ND	ND	ND	ND	ND	ND	ND	ND	1.00E+0	1.00E+0	1.00E+0	1.00E+0	1.00E+0	3.00%
Human toxicity - cancer effects	HTP-c²	CTUh	1.00E+0	1.00E+0	ND	ND	ND	ND	ND	ND	ND	ND	1.00E+0	1.00E+0	1.00E+0	1.00E+0	1.00E+0	4.00%
Human toxicity - non-cancer effects	HTP-nc²	CTUh	1.00E+0	1.00E+0	ND	ND	ND	ND	ND	ND	ND	ND	1.00E+0	1.00E+0	1.00E+0	1.00E+0	1.00E+0	1.00%
Land-use related impacts/soil quality	SQP²	Dimensionless	1.00E+0	1.00E+0	ND	ND	ND	ND	ND	ND	ND	ND	1.00E+0	1.00E+0	1.00E+0	1.00E+0	1.00E+0	1.00%
Acronyms	PM = Potential incidence of disease due to particulate matter emissions; IRP = Potential human exposure efficiency relative to U235; ETP-fw = Potential comparative toxic unit for ecosystems; HTP-c = Potential comparative toxic unit for humans; HTP-nc = Potential comparative toxic unit for humans; SQP = Potential soil quality index.
General disclaimer	It is discouraged to use the results of modules A1-A3 without considering the results of module C.
Disclaimer 1	This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
Disclaimer 2	The results of this environmental impact indicator shall be used with care as the uncertainties of these results are high or as there is limited experience with the indicator.
Disclaimer 3	The maximum variation in results between the included products.

Additional voluntary environmental performance indicators

Impact category	Indicator	Unit	A1-A3	A4	A5	B1	B2	B3	B4	B5	B6	B7	C1	C2	C3	C4	D	Variation¹
1	1	1	1.00E+0	1.00E+0	ND	ND	ND	ND	ND	ND	ND	ND	1.00E+0	1.00E+0	1.00E+0	1.00E+0	1.00E+0	1.00%
Acronyms	213
General disclaimer	It is discouraged to use the results of modules A1-A3 without considering the results of module C.
Disclaimer 1	The maximum variation in results between the included products.

Resource use indicators according to EN 15804

Indicator	Unit	A1-A3	A4	A5	B1	B2	B3	B4	B5	B6	B7	C1	C2	C3	C4	D	Variation¹
PERE	MJ, net calorific value	6.67E+2	6.43E+0	ND	ND	ND	ND	ND	ND	ND	ND	5.30E+0	1.11E+0	5.12E+1	7.69E-2	-7.88E+0	1.00%
PERM	MJ, net calorific value	0.00E+0	0.00E+0	ND	ND	ND	ND	ND	ND	ND	ND	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00E+0	2.00%
PERT	MJ, net calorific value	6.67E+2	6.43E+0	ND	ND	ND	ND	ND	ND	ND	ND	5.30E+0	1.11E+0	5.12E+1	7.69E-2	-7.88E+0	2.00%
PENRE	MJ, net calorific value	8.47E+3	4.41E+2	ND	ND	ND	ND	ND	ND	ND	ND	6.83E+1	7.59E+1	3.30E+2	9.09E+0	1.41E+2
PENRM	MJ, net calorific value	0.00E+0	0.00E+0	ND	ND	ND	ND	ND	ND	ND	ND	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00E+0
PENRT	MJ, net calorific value	8.47E+3	4.41E+2	ND	ND	ND	ND	ND	ND	ND	ND	6.83E+1	7.59E+1	3.30E+2	9.09E+0	1.41E+2
SM	kg	9.57E+2	0.00E+0	ND	ND	ND	ND	ND	ND	ND	ND	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00E+0
RSF	MJ, net calorific value	9.12E+1	0.00E+0	ND	ND	ND	ND	ND	ND	ND	ND	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00E+0
NRSF	MJ, net calorific value	0.00E+0	0.00E+0	ND	ND	ND	ND	ND	ND	ND	ND	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00E+0
FW	m³	5.54E+0	6.89E-2	ND	ND	ND	ND	ND	ND	ND	ND	2.40E-2	1.19E-2	1.64E-1	9.65E-3	3.92E-4
Acronyms	PERE = Use of renewable primary energy excluding renewable primary energy resources used as raw materials; PERM = Use of renewable primary energy resources used as raw materials; PERT = Total use of renewable primary energy resources; PENRE = Use of non-renewable primary energy excluding non-renewable primary energy resources used as raw materials; PENRM = Use of non-renewable primary energy resources used as raw materials; PENRT = Total use of non-renewable primary energy re-sources; SM = Use of secondary material; RSF = Use of renewable secondary fuels; NRSF = Use of non-renewable secondary fuels; FW = Use of net fresh water.
General disclaimer	It is discouraged to use the results of modules A1-A3 without considering the results of module C.
Disclaimer 1	The maximum variation in results between the included products.

Waste indicators according to EN 15804

Indicator	Unit	A1-A3	A4	A5	B1	B2	B3	B4	B5	B6	B7	C1	C2	C3	C4	D	Variation¹
HWD	kg	3.25E+0	2.73E-3	ND	ND	ND	ND	ND	ND	ND	ND	3.34E-4	4.72E-4	1.83E-3	4.81E-5	2.37E-3	1.00%
NHWD	kg	4.56E+2	3.84E+1	ND	ND	ND	ND	ND	ND	ND	ND	2.81E+0	6.66E+0	9.50E+2	6.00E+1	-2.43E+0	2.00%
RWD	kg	1.03E-2	1.34E-4	ND	ND	ND	ND	ND	ND	ND	ND	1.65E-4	2.32E-5	6.69E-4	1.34E-6	-3.70E-4	3.00%
Acronyms	HWD = Hazardous waste disposed; NHWD = Non-hazardous waste disposed; RWD = Radioactive waste disposed.
General disclaimer	It is discouraged to use the results of modules A1-A3 without considering the results of module C.
Disclaimer 1	The maximum variation in results between the included products.

Output flow indicators according to EN 15804

Indicator	Unit	A1-A3	A4	A5	B1	B2	B3	B4	B5	B6	B7	C1	C2	C3	C4	D	Variation¹
CRU	kg	0.00E+0	0.00E+0	ND	ND	ND	ND	ND	ND	ND	ND	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00E+0	1.00%
MFR	kg	1.73E+2	0.00E+0	ND	ND	ND	ND	ND	ND	ND	ND	0.00E+0	0.00E+0	9.40E+2	0.00E+0	0.00E+0
MER	kg	0.00E+0	0.00E+0	ND	ND	ND	ND	ND	ND	ND	ND	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00E+0	2.00%
EEE	MJ, net calorific value	0.00E+0	0.00E+0	ND	ND	ND	ND	ND	ND	ND	ND	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00E+0
EET	MJ, net calorific value	0.00E+0	0.00E+0	ND	ND	ND	ND	ND	ND	ND	ND	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00E+0	1.00%
Acronyms	CRU = Components for re-use; MFR = Materials for recycling; MER = Materials for energy recovery; EEE = Exported electrical energy; EET = Exported thermal energy.
General disclaimer	It is discouraged to use the results of modules A1-A3 without considering the results of module C.
Disclaimer 1	The maximum variation in results between the included products.

Results for additional scenarios for modules A4-C4

Impact category	Indicator	Unit	A1-A3	A4	A5	Variation¹
1	2	3	2.00E+0	3.00E+0	2.00E+0	1.00%
Acronyms	1
Disclaimers	1
General disclaimer	It is discouraged to use the results of modules A1-A3 without considering the results of module C.
Disclaimer 1	The maximum variation in results between the included products.

Results of an alternative modelling approach

Impact category	Indicator	Unit	A1-A3	A4	A5	B1	Variation¹
1	1	1	1.00E+0	1.00E+0	1.00E+0	1.00E+0	1.00%
Acronyms	1
Disclaimers	1
General disclaimer	It is discouraged to use the results of modules A1-A3 without considering the results of module C.
Disclaimer 1	The maximum variation in results between the included products.

Alternative GWP-biogenic results

Impact category	Indicator	Unit	A1-A3	A4	A5	B1	Variation¹
Climate change - biogenic	GWP-biogenic	kg CO₂ eq.	1.00E+0	1.00E+0	1.00E+0	1.00E+0	1.00%
Acronyms	GWP-biogenic = Global Warming Potential biogenic.
General disclaimer	It is discouraged to use the results of modules A1-A3 without considering the results of module C.
Disclaimer 1	The maximum variation in results between the included products.

Alternative results based on location-based electricity modelling

Impact category	Indicator	Unit	A1-A3	Variation¹
1	1	2	2.00E+0	1.00%
Acronyms	2
Disclaimers	2
General disclaimer	It is discouraged to use the results of modules A1-A3 without considering the results of module C.
Disclaimer 1	The maximum variation in results between the included products.

GWP-GHG results of the “best-case product”

Impact category	Indicator	Unit	A1-A3	A4	A5	Variation²
Climate change - GWP-GHG	GWP-GHG¹	kg CO₂ eq.	1.10E+1	1.00E+0	1.10E+1	1.00%
Acronyms	GWP-GHG = Global warming potential greenhouse gas.
General disclaimer	It is discouraged to use the results of modules A1-A3 without considering the results of module C.
Disclaimer 1	The GWP-GHG indicator is termed GWP-IOBC/GHG in the ILCD+EPD+ data format. The indicator accounts for all greenhouse gases except biogenic carbon dioxide uptake and emissions and biogenic carbon stored in the product. As such, the indicator is identical to GWP-total except that the CF for biogenic CO₂ is set to zero.
Disclaimer 2	The maximum variation in results between the included products.

GWP-GHG results of the “worst-case product”

Impact category	Indicator	Unit	A1-A3	A4	A5	B1	Variation²
Climate change - GWP-GHG	GWP-GHG¹	kg CO₂ eq.	1.00E+0	2.00E+0	3.00E+0	3.00E+0	1.00%
Acronyms	GWP-GHG = Global warming potential greenhouse gas.
General disclaimer	It is discouraged to use the results of modules A1-A3 without considering the results of module C.
Disclaimer 1	The GWP-GHG indicator is termed GWP-IOBC/GHG in the ILCD+EPD+ data format. The indicator accounts for all greenhouse gases except biogenic carbon dioxide uptake and emissions and biogenic carbon stored in the product. As such, the indicator is identical to GWP-total except that the CF for biogenic CO₂ is set to zero.
Disclaimer 2	The maximum variation in results between the included products.